all metals-powder-coating

Powder Coating Specialists since 1999.

Phone: (612) 4721 4279

Electrical / Corrosion Insulation

All Metals Powder Coating offers Electrical Insulation / Corrosion Insulation service. The insulating coating powders provide electrical insulation and environmental protection.

AMPC offers a process that is called fluidised bed technique where the product to be treated is heated so that a linear low density polyethylene can be applied up to 400 to 500 micron thick, (depending on the product to be treated). This provides an excellent barrier against corrosion as well as an excellent insulating media for electrical components and bus bars.

The basic principle of fluidised bed dip coating is that a film of plastic powder is made to adhere to the hot surface of an object. The plastic film is fused by the application of heat and is changed from its powdered state into a smooth coating presenting an attractive, corrosion resistant surface.

Typical Applications Electrical Insulation / Corrosion Insulation:

  • Electrical power distribution

  • Electric motor stators and armatures

  • Alternator components

  • Electrical housings and modules

  • Ceramic, tantalum, and film capacitors

  • Bus Bars

  • Motor Iron & Toroid Cores

  • Magnet Wire & Hybrid Circuits

  • Varistors /Thermistors

  • Capacitors & Resistor

Key characteristics:

  • High gloss

  • Good flow and processability

  • Adhesion to metal and glass fibre

Electrical_Corrosion Insulation-Red-3
Electrical_Corrosion Insulation-Grey-2
Electrical_Corrosion Insulation-Grey-3
Electrical_Corrosion Insulation-Red-2
Electrical_Corrosion Insulation-Red-4
Electrical_Corrosion Insulation-Grey-1
Electrical_Corrosion Insulation-Red-5
Electrical_Corrosion Insulation-Red-1

@ 2023 All Metals Powder Coating Pty Limited. Site by